Wear Plates and Rings Archives - Supco Canada Railway Supply Group

Product Description

SUPCO SKU

OEM SKU

Wear Plate, Coupler

Coupler Carrier Wear Plate, 3/4 x 12-5/8 (Versylon)

Wear Plate, 761 Traction Motor Nose 3/4 X 3 X 3 1/4 Manganese 11-14%

Wear Plate, 3/8 X 7 X 13

Wear Plate, 3/8 x 6-3/4 x 9-1/4, Steel, with 1-Inch Hole

Wear Plate, 1/4 x 6 x 8-1/2

Wear Plate, Flexible Rubber TM Air Duct (Versylon)

Wear Plate, 0.25 x 7-1/4 x 12, with dual 3/4 holes

Wear Plate, 0..250 x 7-1/4 x 4-5/8

Wear Pad, 5 x 3 x 1/2 (Steel)

Wear Plate, Flexible Rubber TM Air Duct

Wear Plate, 3/16 x 8-1/2 x 12

Plate, Wear 0.120 x 3.125 x 14.750

Plate Assembly, Spring Plank Bolster Wear

Wear Plate, 1/4 x 7-1/2 x 15-5/8, Steel, Bolster Snubber

Wear Plate, Steel and Phenolic, 8 X 13 X 3/4

Wear Plate, 3/16 x 5-13/16 x 6-1/2

Bracket, Wear Plate

Wear Plate, Pedestal Liner Adapter Lateral (Steel)

Wear Plate, Flexible Rubber TM Air Duct (Versylon)

Coupler Carrier Wear Plate, 14-3/4 x 4-3/4 x 3/8 (Versylon)

Wear Plate, Truck Frame

Wear Plate .375 X 2.50 X 10.06 ( AR-400 )

Wear Pad, 3-3/8 x 11-3/8 x 3/2 Thick, Side Bearing

Wear Plate, 1/4 X 3 X 5-1/2

Wear Plate, T-Bracket (Versylon) (HiAd)

Wear Plate, 1.12 x 3.50 Diameter (Nylon Alloy)

Ring, Wear 3/8 Thick

Wear Plate, 1/4 x 3 x 1-1/2 with Twin Holes (Nylon Alloy)

Wear pad Assembly

Liner, Journal Box Adapter Wear (Steel)

Wear Plate, 1/4 x 1-1/2 x 4-1/2, Phenolic, Stabilizer Bar

Wear Pad, Lateral Thrust

Wear Plate, 3/16 x 6-1/2 x 12-1/4, Manganese, Bolster

Wear Plate, 1/4 x 9-5/8 x 7

Wear Plate, 1/4 x 10-1/2 x 4-3/4

Wear Plate Assembly (Nylatron)

Wear Plate, Flexible Rubber TM Air Duct (Versylon)

Plate, Wear 0.313 x 3.125 x 14.750

Wear Plate, 1/4 x 2-1/4 x 10-1/4, Steel, with Radius Cutout

Wear Plate, 1/4 x 2-3/4 x 2-3/4 (AR400 Material)

WEAR PLATE, BOTTOM, CENTRE PIN

WEAR PLATE – BAR

Ring – Centre Half

Ring Centre half

Pad – Lateral

Pesestal Assy Gm New Locos 4300HP

Wear Plate 0.50

This Item is blank and should be assigned later

PLATE CENTER WEAR

RING CENTER HALF

LINER – PEDESTAL

LINER- PEDESTAL

EMD® and GE® are registered trademarks for Electro-Motive Diesel Inc. and General Electric Company. Supco Canada Railway Supply is neither authorized EMD® and GE® distributor nor otherwise associated or affiliated with EMD® and GE®. The EMD® and GE® models or part numbers used in our literatures are for identification purpose only. There is no intent to represent these models or parts as made by OEM unless explicitly identified in product description. However Supco Canada Railway Supply confirms and represents that its replacement parts, components and sub-systems are compatible with such made by EMD® and GE®.

